Bitcoin Core version 0.12.0 released

StableCoin

This subreddit is dedicated to inform and discuss the revolutionary cryptocurrency Stablecoin.
[link]

Aeon

Aeon (AEON) is a private, secure, untraceable currency. You are your bank, you control your funds, and nobody can trace your transfers.
[link]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Mega FAQ (Or: Please come here for your questions first)

Qbundle Guide (Step by step setup & Bootstrap) https://burstwiki.org/wiki/QBundle
1( I want to mine or activate My account. Where do find the multiple coins?
You only need 1, an outgoing transaction or reward reassignment will set the public key. Get them from:
https://www.reddit.com/burstcoinmining/comments/7q8zve/initial_burstcoin_requests/
Or (Faucet list)
https://faucet.burstpay.net/ (if this is empty, come back later)
http://faucet.burst-coin.es
Or
https://forums.getburst.net/c/new-members-introductions/getting-started-initial-burstcoin-requests
2( I bought coins on Bittrex and want to move to my new wallet, but can't. Why?
Bittrex will only send to accounts with a public key (not a Burst requirement) so see number 1 and either set the name on the account (IF you will not mine) or set the reward recipient to the pool. Either action will enable the account and allow for transfers from Bittrex.
3( I sent coins from Poloniex/anywhere to Bittrex and they don’t show up after a considerable time. Why?
You need to set an unencrypted message on the transaction, informing Bittrex which account to send the funds to (this is in the directions on Bittrex). Did you do this? Contact Bittrex support with all the details and eventually you will get your funds.
4( How much can I make on Burst?
https://explore.burst.cryptoguru.org/tool/calculate
Gives you an average over time assuming a few things like: Average luck/100% uptime/no overlapping/fees on pool/good plot scan time (<20 seconds) if you do not have all of these, you may not see that number.
5( If I use SSD’s would I make more money?
No, it’s 95% capacity and 5% scan time that determine success. More plot area = better deadlines = better chance of forging a block, or better rates from a pool.
6( What is ‘solo’ and ‘pool’ (wasn’t his name Chewbacca?)
Solo is where you attempt to ‘forge’ (mine) a block by yourself; you get 100% of the block reward and fees. But you only receive funds if you forge, no burst for coming in second place.
Pools allow a group of miners to ‘pool’ together their resources and when a miner wins, they give the pool the winnings (this is done by the reward assignment you completed earlier), it is then divided according to different percentages and methods and burst is sent out according to pool rules (minimum pay-out, time, etc.)
7( I have been mining for 2 days and my wallet doesn’t show any Burst WHY?
Mining solo: it is win-or-lose, nothing in between, and wining is luck and plot size. Pool mining: because it costs 1 burst to send burst, the pools have either a time requirement (every X days) or a minimum amount (100 burst +) so you need to research your pool. Some pools allow for you to set the limit (cryptoGuru and similar) to be met before sending
8( How do I see what I have pending?
On CryptoGuru, based pools, it’s the ‘Pending (burst)’ column, other pools, look for the numbers next to your burst ID. One is Paid and the other pending.
9( I’m part of a pool and I forged a block, but I didn’t recieve the total value of the block, why?
A pool has 2 basic numbers that denote the pay-out method, in the format ‘XX-XX’ (i.e. 50-50) The first number is the % paid to the block forger (miner) and the second is the retained value, which is paid to historic ‘shares’ (or, past blocks that the pool didn’t win, but had a miner that was ‘close’ to winning with a good submitted deadline)
Examples of pools:
0-100 (good for <40TB)
20-80 (30-80TB)
50-50 (60-200TB)
80-20 (150-250)
100-0 (solo mine, 150+ TB)
Please note that there is an overlap as this is personal preference and just guidance; a higher historical share value means a smoother pay-out regime, which some people prefer. If fees are not factored in, or are the same on different pools, the pay-out value will be the same over a long enough period.
10( Is XXX model of hard drive good? Which one do you recommend?
CHEAP is best. If you have 2 new hard drives, both covered by warranty, get the one with the lowest cost per TB (expressed as $/TB , calculated by dividing the cost by the number of terabytes) because plot size is KING,
11( How many drives can I have on my machine?
For best performance, you can have up to 2 drives per thread (3 on a new fast AVX2 CPU). So that quad-core core-2-quad can have up to 8 drives, but a more modern i7 with 4 cores + hyper threading can squeeze 8 * 3 or 24 drives. (Performance while scanning will suffer)
12( Can I game while I mine?
Some people have done so, but you cannot have the ‘maximum’ number of drives and play games generally.
13( Can I mine Burst and GPU mine other coins?
Yes, if you CPU Mine Burst.
14( I’m GPU plotting Burst and GPU mining another coin, my plots are being corrupted, why?
My advice is dedicating a GPU to either mining or plotting, don’t try to do both.
15( What is a ‘plot’?
A plot is a file that contains Hashes, these hashes are used to mine burst. A plot is tied to an account, but they can be created (with the same account ID) on other machines and connected back to your miner(s).
16( Where can I trade/buy/sell Burst?
A list of exchanges is maintained on https://www.reddit.com/burstcoin/ (on the right, ‘Exchanges’ tab) the biggest at the moment are Bittrex and Poloniex, some offer direct Fiat-to-Burst purchase (https://indacoin.com for example)
17( Do I have to store my Burst off the exchange?
No, but it’s safer from hackers who target exchanges, if you cannot guarantee the safety or security of your home computer from Trojans etc, then it might be best to leave on an exchange (but enable 2FA security on your account PLEASE!)
18( What security measures can I take to keep my coin safe?
When you create an account, sign out and back in to your wallet (to make sure you have copied the pass phrase correctly) and keep multiple copies of the key (at least one physically printed or written down and in a safe place, better in 2 places) do not disclose the passphrase to anyone. Finally use either a local wallet or a trusted web wallet (please research before using any web wallet)
19( How can I help Burst?
Run a wallet, which will act as a node (or if you’re a programmer, contact the Dev team Bring attention to burst (without ‘shilling’ or trying to get people to buy) And help translate into your local language
Be a productive member of the community and contribute experience and knowledge if you can, or help others get into Burst.
20( Will I get coins on the fork(s) and where will they be?
There will be no new coin, and no new coins to be given/air dropped etc, the forks are upgrades to burst and there will not be a ‘classic’ or ‘new’ burst.
21( Will I need to move my Burst off of the exchange for the fork?
No, your transactions are on the block chain, which will be used on the fork, they will be visible after the move; nothing will need to be done on your side.
22( Where can I read about the progress of Burst and news in general on the community?
There is no finer place than https://www.burstcoin.ist/
23( What are the communities for Burst and the central website?
Main website: https://www.burst-coin.org/
Reddit: https://www.reddit.com/burstcoin and https://www.reddit.com/burstcoinmining/
Burstforum.net: https://www.burstforum.net/
Getburst forum: https://forums.getburst.net/
Official Facebook channel: https://m.facebook.com/groups/398967360565392
(these are the forums that are known to be supporting the current Dev Team)
Other ways to talk to the community:
Discord: https://discordapp.com/invite/RPhpjVv
Telegram (General): https://t.me/burstcoin
Telegram (Mining): https://t.me/BurstCoinMining
24( When will Burst partner up with a company?
Burst is a currency, the USD does not ‘partner up’ with a company, the DEV team will not partner up and give over to special interests.
25( Why is the DEV team anonymous?
They prefer anonymity, as it allows them to work without constant scrutiny and questions unless they wish to engage, plus the aim is for Burst to become a major contender, and this brings issues with security. They will work and produce results, they owe you nothing and if you cannot see the vision they provide then please do not ‘invest’ for short term gain.
26( When moon/Lambo/$100/make me rich?
My crystal ball is still broken, come back to the FAQ later for answer (seriously, this is a coin to hold, if you want to day-trade, good luck to you)
27( How can I better educate myself and learn about Dymaxion?
Read about the Dymaxion here: https://www.reddit.com/burstcoin/wiki/dymaxion
28( My reads are slow, why?
There are many reasons for this, if your computer has a decent spec it’s likely due to USB3 hub issues, or plugging into a USB2 hub, but other reasons can be multiple plots in the same folder, but it’s best to visit the mining subreddit. They can help more than an simple FAQ https://www.reddit.com/burstcoinmining/
29( I have a great idea for Burst (not proof of stake related)?
Awesome! Please discuss with the DEV team on discord https://discordapp.com/invite/RPhpjVv
(Please be aware that this is a public forum, you need to find who to ask/tell)
30( I have a great idea for Burst (Proof of stake related)?
No. if you want a POS, find a POS coin. On the tangle which is being implemented a POS/POW/POC coin can be created, but BURST will always be POC mined. You are welcome to implement a proof of stake coin on this!
31( Will the Dev team burn any coins?
Burst is not an ICO, so any coins will need to be bought to be burnt. You are welcome to donate, but the DEV team have no intention of burning any coins, or increasing the coin cap.
32( When will there be an IOS wallet?
IOS wallet is completed; we are waiting for it to go on the app store. Apple is the delaying factor.
33( Why do overlapping plots matter?
Plots are like collections of lottery tickets (and if only one ticket could win). Having 2 copies is not useful, and it means that you have less coverage of ‘all’ the possible numbers. It’s not good, avoid.
34( My local wallet used to run, I synchronised it before and now it says ‘stopped’. when I start it, it stops after a few seconds, what should I do?
I suggest that you change the database type to portable MariaDB (on Qbundle, at the top, ‘Database’ select, ‘change database’) and then re-import the database from scratch (see 35)
35( Synchronising the block chain is slow and I have the patience of a goldfish. What can I do?
On Qbundle , ‘Database’ select ‘Bootstrap chain’ and make sure the CryptoGuru repository is selected, then ‘start Import’ this will download and quickly stuff the local database (I suggest Portable MariaDB, see 34) (lol, loop)
36( What will the block reward be next month/will the block rewards run out in 6 months?
https://www.ecomine.earth/burstblockreward/ Rewards will carry on into 2026, but transaction fees will be a bigger % by then, and so profitable mining will continue.
37( How can I get started with Burst (wallet/mining/everything) and I need it in a video
https://www.youtube.com/watch?v=LJLhw37Lh_8 Watch and be enlightened.
38( Can I mine on multiple machines with the same account?
Yes, if you want to pool mine this can be done (but be prepared for small issues like reported size being incorrect. Just be sure to keep question 33 in mind.)
39( Why do some of my drives take forever to plot?
Most likely they are SMR drives, it’s best to plot onto another SSD and then move the finished plot/part of a plot across to the SMR drive as this is much quicker. SMR drives are fine on the read, just random writes that are terrible.
So plot an SMR drive quickly, plot to a non SMR or better still SSD drive, in as big a chunk as possible (fewer files better) and move. a version of Xplotter, called Splotter, can do this easily.
https://github.com/NoParamedic/SPlotter
40( I have a great idea; why not get listed on more exchanges!!
Exchanges list coins because of 2 reasons:
  1. Clients email and REQUESTING Burst and provide details like:
    i. https://www.burst-coin.org/information-for-exchanges
  2. The coin pays (often A LOT, seriously we’ve been asked for 50 BTC)
I suggest you speak with your exchange and ask ‘when will they offer Burst?’
41( Do you have a roadmap?
https://www.burst-coin.org/roadmap
42( Why is the price of Burst going up/down/sideways/looping through time?
The price of burst is still quite dependent upon Bitcoin, meaning that if Bitcoin gains, the value of Burst gains, if Bitcoin drops then Burst also drops. If there is news for Burst then we will see something independent of Bitcoin moving. Variations can be because of people buying in bulk or selling in bulk. There are also ‘pump and dump’ schemes that we detest, that can cause spikes in price that have nothing to do with news or Bitcoin, just sad people taking advantage of others.
43( Where is the best place to go with my mining questions?
https://www.reddit.com/burstcoinmining/
or https://t.me/BurstCoinMining
44( What hardware do you advise me to buy, is this computer good?
See question 43 for specific questions on hardware, it depends on so many variables. The ‘best’ in my opinion is a 36 bay Supermicro storage server, usually they have dual 6-core CPU’s and space for 36 drives. No USB cables, plotting and mining monster, anything else, DYOR.
45( Where do you buy your hard drives?
I have bought most from EBay in job lots, and some refurbished drives with short warranties. Everything else I have bought, from Amazon.
46( Can I mine on my Google drive/cloud based storage?
In short: no. If you want to try, and get to maybe 1 TB and then find that your local connection isn’t fast enough, or that shortly after, your account is blocked for various reasons. Please be my guest.
47( Can I mine on my NAS?
Some you can mine with the NAS (if it can run the miner, it can scan locally) but generally they’re not very fast. good for maybe 16 TB? Having a plot on a NAS and mining from another computer depends on the network speed between the NAS and scanning computer. I believe you can scan about 8 TB (maybe a bit more) and keep the scan times to within acceptable, but YMMV.
48( How can I set up a node?
No need to set up a node, just set up a wallet (version 2.0.4) or Qbundle (2.2) and it will do the rest
49( Are the passphrases secured?
I’ll leave the effort to a few people to show how secure a 12-word passphrase is: https://burstforum.net/topic/4766/the-canary-burst-early-warning-system Key point: brute forcing it will be around 13,537,856,339,904,134,474,012,675,034 years.
50( I logged into my account (maybe with a different burst ID) and see no balance!!
I have dealt with this very issue multiple times, and there are only 3 options:
  1. You have typed in the password incorrectly
  2. You have copy-pasted the password incorrectly
  3. You are trying to log into a ‘local wallet’ which the block chain has not finished updating
The last one generally leaves the burst ID the same, but old balances will show. No, this is not a security problem, and yes, windows loves to add spaces after the phrase you enter when copied, and that space is important in getting to your account.
51( Are there channels for my language?
Telegram:
Spanish: https://t.me/burstcoin_es
German: https://t.me/Burstcoinde
Italian: https://t.me/BurstCoinItalia
Forum:
Spanish: https://burst-coin.es/index.php/forum/index
Discord:
Spanish: https://discordapp.com/invite/RaaGna9
Bulgarian: https://discord.gg/r4uzTd
(there are others, please contact me to put up)
52( I am mining in a pool, and it says that my effective capacity is lower than I actually have, why?
  1. If you've not been mining for >48 hours, or just added additional capacity, it will take time.
  2. The value fluctuates (normally, +-5% but can be up to 10% at times)
  3. Read on the ‘Quick info’ tab about adjusting your deadline to compensate for changes i. revisit once a month for best results
  4. If you have overlapping plots it will also be lower so be aware of this (see question 33)
53( What pool should I join?
First of all, read question 9, after you have understood that it depends on the size (and how patient you are) select from the following list: https://www.ecomine.earth/burstpools/
54( What miner to use?
I use Blago’s miner, there are many out there but Blago’s works for me on CPU mining, it can be found in Qbundle.
55( What Wallet to use (I use windows)?
Qbundle: https://github.com/PoC-Consortium/Qbundle/releases/ guide: https://burstwiki.org/wiki/QBundle
56( What Wallet to use (Linux)?
https://package.cryptoguru.org/ for Debian and Ubuntu, for Mac. read:
https://www.ecomine.earth/macoswalletinstallguide/
57( Will i need to 'replot' after POC2 (second fork) happens?
No, there will be a tool which will optimise, but it is not CPU intensive (it basically re-shuffles your plot) and is just IO intensive. You do not need to replot.
TurboPlotter and https://github.com/PoC-Consortium/Utilities/tree/mastepoc1to2.pl are tools that will/can be used to actuate optimization, but PLEASE wait with optimization until after the hard fork.
58( Will the transaction fee always be 1 burst?
No, dynamic fees are coming in the next fork.
submitted by dan_dares to burstcoin [link] [comments]

New to Ðogecoin?

Ðogecoin is a community friendly crypto-currency. Very similar to Bitcoin, but with a more noob-friendly and welcoming community. Be sure to check the sidebar - Being a new shibe though, you may be better served with a reddit-style self-post.
To do the special Ð character, hold alt and type 0208.
To do the special Ð character on Ubuntu 12.04: Ctrl + Shift + U; then type 00D0; finally press enter for Ð (Starkythefox)
To do the special Ð via HTML: & ETH; (no space) (cdeverett)
Do not expect to make a fortune in Ðogecoin. A Ðoge is worth about 0.00052 cents USD. The fact it has gotten so popular shocked even the creators, so consider Dogecoin your 'fuck around' cryptocurrency: You can afford to make mistakes while you learn.
What is a shibe? - A useholder of Dogecoin
What is this about the moon? - A lot of other cryptocurrencies including bitcoin expect the price of their coins to appreciate to the point they can buy huge mansions in which to store all their smaller mansions and little gold statues of other mansions. Shibes know the price of Ðogecoin will go to the moon. (Warning: Moon is not a tangible number. Heating in your house may be turned off if you attempt to pay in dogecoin)
Don't use an online wallet - Download the wallet program directly to your computer. You'll have full control and prevent leaving your Ðoge in the hands of strangers.
Sign up with a pool and try to mine some coin for yourself. Even if your computer sucks! It feels great when you see some mined coin pop up in your wallet.
Seriously. Try mining! Mining can be a bit daunting to begin with, but its very rewarding and you'll have a much better grasp of the beginning to end of how cryptocurrency works. (Unless you are using GUIMiner, you'll have to create a .bat file with your settings. Search/ask this subreddit if you get stuck)
Earning Ðogecoin Outside of mining - It's easy to earn Ðogecoin in the /dogecoin subreddit(s). Post something helpful or create funny content, you'll get tipped. Want to offer a silly service? check out /shibemarket/ (I bought reasons Mario Kart can suck my dick for 227 doges a pop a while back.) Hell, you can even beg or buy some.
Tipping: - Send a message to both tip bots to register so you can give and receive tips. The bots are so_doge_tip and dogetipbot. Send them each a message that says +register. It might take a while to get a response, but once you do you are ready to go.
Gambling: - What, is the emotional rollercoaster of a non-government backed, untested digital currency with all the worries of a pennystock and complications of FOREX not wild enough for you? I've seen a lot of people posting newly discovered gambling problems with this new found technology. You are best to avoid it. If you're looking to make money and are counting on Ðogecoin to make that happen - Just keep mining or buy in small, regular increments. The house always wins.
Faucets: (Thanks vidarino) Free dogecoin to get you started! You can get a very small bit of free Dogecoin in your wallet by inputting your receiving address into one of the faucets listed in the sidebar. Once you have some Ðoge of your very own, be sure to tip the faucets to help spread Ðoge to others! Don't be greedy and totally drain the faucets - they have very little and run on donations
http://dogefaucet.tk/ - No longer working
http://bartstuff.eu/doge/doge2.php - No longer working
http://freedoge.we-mine.it/ - No longer working
Where is your wallet.dat On win7 you can find that here: C:\Users\owner\AppData\Roaming\DogeCoin
Finally - /dogecoin is all about tipping, helping new shibes out, and posting memes and image macros.
Edit: Added note about gambling
Edit 2: Added note about faucets
submitted by sns_abdl to dogecoin [link] [comments]

Welcome to r/STRAKS!

Welcome to STRAKS!

This thread is built to help users joining STRAKS and the STRAKS community. Please make sure to follow our rules (posted in the sidebar and below). Feel free to use this thread to introduce yourself and ask questions no matter how dumb :). This thread should be considered up to date. However, if you find something that is incorrect, out of date, or simply missing then please contact me or other moderators so we can update it. Thank you!

Getting Started

What is STRAKS?

STRAKS (STAK) is a cryptocurrency platform with only one goal in mind. Innovate e-commerce with the use of digital currency to facilitate smooth, instant, and secure e-commerce transactions.
With e-commerce sales projected to reach over $2.8 trillion in 2018 and $4.8 trillion in 2021 and Bitcoin showing signs of failure due to increasing fees and the inability to process large amounts of transactions, STRAKS seeks to take hold with the ability to process over 11 million transactions a day, 40 times the amount Bitcoin can process. This ensures that STRAKS will be able to handle every single transaction with a low fee. This keeps your transactions in a secure and trusted blockchain where miners keep your transactions and the networks secure and safe, making it the easiest and cheapest way to securely purchase goods online.
 
The main attributes of STRAKS are:

E-commerce

  • With quickly growing global e-commerce sales STRAKS seeks to assert itself by implementing relevant technologies achieved through development that will help make sure e-commerce transactions are smooth and quick.

Open Source

  • Open Source development allows anyone to contribute by simply making a pull request through GitHub. With anyone contributing innovation will lead to rapid product enhancements that will strengthen STRAKS market relevance.

Decentralized Ownership

  • Devolved ownership and access rights, this ensures that the application and STRAKS lifespan are not dependent on a single individual. This allows STRAKS future to be safeguarded, but also your investment and partnerships.

Community Oriented

  • Focusing on the importance of its community, the STRAKS development team is collecting feedback and suggestions from the community. Future implementations such a STRAKS-Vote is on the road-map that will allow STRAKS users to propose suggestions then vote on them. Coins collected from voting will form the basis of funding the idea.

Speed

  • With constant optimization towards transaction speeds you can send and receive STRAKS instantly. With the inclusion of Segwit that increase block-size and capacity it will ensure that the network grows. Segwit with the combination of a block interval of just 60 seconds ensures that your transaction with be confirmed quickly and safely.

Privacy

  • Nothing is more important to STRAKS than its community and investors. Safe-guarding both is key. To ensure that the currency remains fungible the Zerocoin protocol will be implemented. The currency will maintain equal values irrespective of past transactions, as transactions will remain untraceable and anonymous. This allows STRAKS to protect its long-term market position.

Self-funded

  • STRAKS seeks to be 100% self-funded, it has one of the lowest PoW fees on the market. A 5% fee on PoW insures that STRAKS is well-funded through its entire lifespan. This will allow STRAKS to support product development, business development, and operational expenses.
 
Differences Between Other Cryptocurrencies:
Comparison Chart STRAKS Bitcoin Bitcoin Cash Dash ZCash Vertcoin
Bitcoin Version 0.14.2.0 0.16.0 0.14.1.0 0.12.2.0 0.11.2.0 0.13.1.0
Block Size (MB) 4 1 8 1 2 1
Segwit Block Size (MB) 16 4 n/a n/a n/a 4
Block Time (Seconds) 60 600 600 150 150 150
Coin Base Maturity (Confirmations) 100 100 100 100 100 100
Transactions Per Second 133.3 3.3 26.7 13.3 13.3 13.3
Difficulty Algorithm D106 KGW D106 DGW Digishieldv3 KGW
Hashing Algorithm Lyra2rev2 SHA256 SHA256 X11 Equihash Lyra2rev2
ASIC Resistant x x x
Segwit x x x
Segwit2x x x x x x
Segwit4x x x x x x
Lightning Network Compatible x x x
Instant Payouts LN LN x InstantX x LN
Atomic Swaps x x x
Max Coin Supply (Millions) 150 21 21 21 21 84
Budget Funding 5% 0% 0% 10% 20% 0%
Masternodes x x x x
Zerocoin Protocol WIP x x x x x
Zk-snarks x x x x x

Wallet Downloads

Useful Links

Block Explorer: https://straks.info
Discord Channel: https://discord.straks.tech
STRAKS Discord Forums: https://straks.co
STRAKS ANN: https://bitcointalk.org/index.php?topic=2433318.0
STRAKS Facebook: https://facebook.straks.tech
STRAKS GitHub: https://github.com/straks/straks
STRAKS News: https://straks.tech/insight/
STRAKS Telegram: https://telegram.straks.tech
STRAKS Twitter: https://twitter.straks.tech

Exchanges

BarterDEX: https://github.com/KomodoPlatform/BarterDEX
BitexLive: https://bitexlive.com/exchange/BTC-STAK
Coinhouse: https://coinhouse.eu/markets/stakbtc
Crex24: https://crex24.com/exchange/STAK-BTC
CryptoBridge: https://wallet.crypto-bridge.org/market/BRIDGE.STAK_BRIDGE.BTC
Stocks.Exchange: https://stocks.exchange/trade/STAK/BTC
SouthXchange: https://www.southxchange.com/Market/Book/STAK/BTC

Mining Information

Mining Pools

Software

Nvidia:

AMD:

Tutorials

STRAKS Tips

  • The easiest way to find your own STRAKS address is in the STRAKS Core wallet under the File -> Receiving Addresses tab.
  • Encrypting your wallet with a secure password helps ensure that your STRAKS can't be stolen. Do not leave your wallets unencrypted!
  • A community member currently hosts a STRAKS faucet found at https://straks.network . Please be sure to thank MrMcMichael for this service!
submitted by DalmationCadet to straks [link] [comments]

Step by step in staking Redd with Raspberry Pi 3

Before I start, I would like to pay complete credits to these two guys :)
https://www.reddcointalk.org/topic/2679/reddcoin-staking-via-ubuntu-mate-on-raspberry-pi-3-model-b-march-2018 (most of my steps, if not all, are from this link)
https://github.com/joroob/reddcoin/blob/mastedoc/build-arm.md
All the steps I am writing is ABSOLUTELY NECESSARY, please don't try to skip it because I did, and it doesn't work.
step 1: get a Raspberry Pi B https://www.raspberrypi.org/products/#buy-now-modal
step 2: make sure you get proper power supply 5v 2A - the Pi will mine, it will need sufficient power. Regular USB samsung charger will not work.
step 3: get proper micro SD card (SanDisk for example) 32Gb++
step 4: USB + Mouse keyboard
step 5: flash micro SD card with Ubuntu MATE
Download Ubuntu Mate image: https://ubuntu-mate.org/raspberry-pi/
Download Etcher: https://etcher.io
After finishing downloading, use Etcher to write/flash the image on micro SD card
After this, your SD card contains Ubuntu MATE OS.
step 6: Place SD Card into Raspberry Pi 3 and start it up. You should be able to see Ubuntu OS! Congrats!
step 7: Connect to wifi or internet cable (internet is better and faster)
step 8: OPTIONAL - turn off UI OS, so that things will work faster
Open XTerminal:
sudo systemctl disable lightdm.service (to turn UI off) 
in case you want to turn UI on again, run this:
sudo systemctl start lightdm.service (to turn UI on) 
step 9: install all dependencies
sudo apt-get update && sudo apt-get install git build-essential libqt4-dev libprotobuf-dev protobuf-compiler libtool autotools-dev autoconf libssl-dev libboost-all-dev wget pkg-config sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install db4.8 sudo apt-get install libminiupnpc-dev sudo apt-get install libqrencode-dev Reboot 
step 10: add additional RAM (sort of) in case the App need it, this is call "Create Swap file"
sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile echo ‘/swapfile none swap sw 0 0’ | sudo tee -a /etc/fstab 
step 11: Build Berkeley Database
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar xfvz db-4.8.30.NC.tar.gz cd db-4.8.30.NC cd build_unix ../dist/configure --enable-cxx make sudo make install 
step 11.5: Set BerkeleyDB path
export CPATH="/uslocal/BerkeleyDB.4.8/include" export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib" export LD_LIBRARY_PATH=/uslocal/BerkeleyDB.4.8/lib/ 
step 12: Build Reddcoin Wallet
---download source code ---- only source from joroob/reddcoin will work because some stweak was needed for ARM CPU
cd ~ git clone https://github.com/joroob/reddcoin.git 
---build reddcoin ----
cd reddcoin ./autogen.sh ./configure --with-gui=no --disable-tests cd src make sudo make install 
If you finish this, you are in a great position!!!
step 13: Create reddcoin configuration file
cd ~ mkdir .reddcoin && cd .reddcoin nano reddcoin.conf rpcuser=YOUR OWN USERNAME, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT rpcpassword=YOUR OWN PASS WORD, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT 
step 14: Use bootstrap
(At this point, you had a running reddcoin daemon, now you can start staking. But syncing the full chain takes long time.)
cd ~/.reddcoin wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.1.2/bootstrap.dat.xz xz -d bootstrap.dat.xz 
step 15: start the reddcoin daemon service cd ~/reddcoin/src ./reddcoind -daemon
After this, you can test if the daemon is working, by perform this command: ./reddcoin-cli getblockcount
step 16: if your app is not able to sync, it is probably the firewall issue with OS, run this to allow port 45444 (used by Reddcoin) and redo step 15
sudo iptables -I INPUT 1 -i eth0 -p tcp --dport 45444 -j ACCEPT sudo iptables -A OUTPUT -p tcp --dport 45444 -j ACCEPT 
step 17: open BEER and enjoy! This is a MUST or the daemon will stop working! I am not kidding!
step 18: Actually, i forgot to mention you need to execute this command for the wallet to stake:
reddcoind walletpassphrase $yourpassword 9999999 true 
ADDITIONAL REMARKS:
From my PC: I am using putty to execute the command, winSCP to monitor the file location on raspberry.
Moving Red Coins out of exchange really a big move, start with normal wallet, don't start with this tutorial :) Ever since I move my coins out of exchange, I am free from all of the ups and downs! Really!
So guys and gals, Redd On!
UPDATE 18 Mar: my first stake has arrived after 6 days staking :)
In case you want to tip me: RaF3TeWqgTzAdnaZQffnsxS74dag13zsAY
Edit 1: Format stuff
Edit 2: Add step 18 to execute staking command.
Edit 3: In case you don't want to compile the source code, you can download my compile version here: https://github.com/hieplenet/reddcoin/releases/tag/v2.0.0.0 (but doing this, you should be aware of the risk of me changing source code for my benefit - I don't change any thing, but you should be cautious, this is the internet :) )
submitted by hieplenet to reddCoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

A moth just flew into my PSU ...

Hey everyone.
I’ve recently built a home server for samba shares and to practice Linux stuff. It is an old HP envy desktop tower that my companies old IT guy was probably using to mine bitcoin. I removed the graphics card and installed Ubuntu on it. (i5-4400, 12 GB DDR3, non-HP PSU, 2x 4 TB WD Reds, 1x 120 GB SSD)
I was working on it just now, in the dark, and a moth, probably about an inch long, flew to the blue-hue light that is the power supply, and got sucked into the fan. The PC is still on and still running, and I haven’t heard any bug noises from inside the PSU. The light for the PSU is very bright blue which is what probably attracted the moth. it’s some shitty Rosewill PSU that I intend on replacing anyway since I want this server to have 24/7 uptime.
But yeah since it was so old I added a new CPU fan, a 145mm Cryorig that didn’t fit in my workstation PC rig, but is also marginally too big for this one too. I am configuring mdadm RAID and have the OS on a SSD, and with adding the new fan, I’ve been messing about on the inside and I have it laying on its side, with the case-side off, with the PSU/cpu/mobo/etc exposed.
The side of the case has been left off and doesn’t even fit now that I tried to put it back on... CPU fan is about 3mm too tall.
But anyway, the moth was flittering in front of the PSU and got sucked in... I got some big downloads tonight, is this safe to leave on? Is that moth’s corpse going to cause a fire while I’m sleeping? I won’t be able to get a gold rated PSU for at least a few more days. Is it possible to rip out the LED that glows up the blue light so his moth brethren won’t get sucked into the same trap as he was? Should I shut it all down?
Sorry for the weird questions guys. I have laid the case side back on where it is supposed to be but it isn’t snapped into the frame, just laid on top, and the PSU is still super bright neon blue...
Please help, thanks
Edit: also if anyone had a suggestion for PSU that’s good for 24/7 uptime for around $120, that would be great.
submitted by Pendulous_balls to buildapc [link] [comments]

FAQs

1. Is MoneroClassic (XMC) a hard fork from Monero?
No. Monero hard forked from itself when updating from v.0.11.1.0 to version v.0.12.0.0. We are working with Monero Network version v.0.11.1.0.
2. Why do you choose to maintain the original Monero chain?
We chose to maintain the original Monero chain based on following ideas:
a) Bitcoin and Litecoin's examples tell us that ASIC mining machines are inevitable.
b) ASIC mining machine increase network stability and prevent user computers from being hijacked by botnets.
c) Considering the risk that would be brought by changing algorithm, we decided to protect the stability of the original chain.
d) Just like ETC and ETH, they are free to develop their own ideas, conduct fair competition, and the free market can make its decision.
We hope that in addition to be anti-ASIC, we can reserve another possibility for Monero, and give users another option. XMC and XMR both are products of Monero. The success of either of them is the success of Monero.
3. When was the hard fork?
Block height 1546000
Timestamp: UTC: 2018-04-06 08:22:11
4. Is MoneroClassic (XMC) pre-mined?
No.
5. Total suply and circulating supply
Total supply: 18.44 million
Circulating supply can be queried at: http://193.112.64.213:9000/get_amount
6. How do I get MoneroClassic (XMC)?
If you have Monero in exchanges (CoinEx, Xstar, gate.io) before the hard fork, you should already have the equivalent amount of XMC in wallet.
If you have Monero in your local wallet before the hard fork, You just need send XMR to a new wallet address form Monero version 0.12, and restore XMC wallet from your old XMR address's seed. Then you will keep your XMR safe. Wait for XMC wallet sync, you will get your XMC.
7. Do you have replay protection?
No. It is the responsibility of cryptocurrency that is hard forking to implement replay protection. Monero team has not announced plan to prevent replay attacks on the new fork chain, so boths chains (XMC and XMR) are at risk of replay attacks. To avoid replay attacks, users should create new XMC and XMR wallets, then transfer balance to them.
8. Where can we trade XMC?
HitBTC:
https://hitbtc.com/xmc-to-usdt
https://hitbtc.com/xmc-to-btc
https://hitbtc.com/xmc-to-eth
Gate.io:
https://gate.io/trade/xmc_usdt
https://gateio.io/trade/XMC_BTC
CoinEx:
https://www.coinex.com/trading?currency=btc&dest=xmc&tab=limit
https://www.coinex.com/trading?currency=bch&dest=xmc&tab=limit
TradeOgre:
https://tradeogre.com/exchange/BTC-XMC
BitAsiaEx:
https://www.bitasiaex.com/trade/cny_coin.html?tradeId=59&type=2
https://www.bitasiaex.com/trade/cny_coin.html?tradeId=58&type=1
9. Is the wallet available?
The wallet is available on LoMoStar.
Wallet gui for Window:
https://github.com/monero-classic/monero-gui/releases/download/v0.1.0.1/monero-classic-0.1.0.1-win64.zip
MD5:c8eabe54c396fe981b64cc09a07da20f
Wallet gui for Ubuntu:
https://github.com/monero-classic/monero-gui/releases/download/v0.1.0.1/monero-classic-0.1.0.1-ubuntu-x64.zip
MD5:11c1fc10343d2fff9ad5bf01160869f1
10. Remote node
193.112.64.213
111.230.177.177
111.231.207.225
118.24.41.27
123.206.77.55
port:18081
11. Block explorer
explorer.monero-classic.org
12. Source code
https://github.com/monero-classic
13. Support list
Community: AMT community, LoMoStar community
Mining pool: AntPool, Poolin, FrogPool, 91pool, F2POOL, EasyHashPro, FairHash
Exchange: CoinEx, gate.io, HitBTC, TradeOgre, BitAsiaEx
Wallet: LoMoStar
14. Contact us Website: monero-classic.org
Telegram:https://t.me/xmccurrency
Twitter:https://twitter.com/xmccurrency
Reddit: https://www.reddit.com/XMC_Official
Bitcointalk announcement: https://bitcointalk.org/index.php?topic=3256439.msg33919963#msg33919963
submitted by xmccurrency to XMC_Official [link] [comments]

Zeus/Gaw ASIC Setup Guide for Linux/Raspberry Pi

So I recently I became quite interested in mining and cyptocurrencies in general. So interested in fact that I bit the bullet and decided to buy myself a GAW Fury.
I then spent some time doing research on how to set up a GAW or Zeus ASIC on Linux, in particular on a Raspberry Pi, and have found most guides to be awful. The reason they are so bad IMHO is that they assume quite a bit of prior knowledge, either with Linux or mining, and give very little instructions. So I have tried to put together a guide that requires very little prior knowledge.
It is my aim that anyone could get their shiny new asic up and mining in no time using this guide. Anyway, I present...

The Complete Noobs Guide to Setting Up a Zeus or Gaw ASIC on Debian/Ubuntu/Raspberry Pi

Resources

About Cyrptocurrencies and Their Jargon

If you are new to cryptocurrencies and how they work I suggest taking a look at this series of KhanAcademy videos. They are for Bitcoin but the theory is the same. I found them very helpful when it came to understanding what mining actually does and the mechanics of cyrptocurrencies.
Also take a look at sircamm22 his info found here, is great and breaks down a large number of concepts. I slightly disagree with no. 21 regarding preordering. Just exercise common sense.

Linux

If you are new to Linux you could follow along by simply typing in the commands. However I highly recommend taking the time to learn what you are doing. This course is a great place to start.

Computer Setup

By the end of this section you will have your device turned on, fully setup and connected to the internet with.
Note: Commands to be typed into the command line will be displayed like this:
echo Hello World

Desktop/Laptop

For laptops and desktops already running Ubuntu or Debian I will assume you have setup your internet setup as part of the installation.
If not: There are plenty of guides out there and the installation/setup process is very easy. A good place to start for Ubuntu is here.
Now open up a terminal window. Ctrl + alt + t on a standard Ubuntu installation.
If you plan on using this PC without a monitor I would suggest installing an SSH Server.
These commands will be discussed later on in the guide.
sudo apt-get -y install openssh-server
sudo service openssh-server start

Raspberry Pi

The Raspberry Pi Foundation has put together a great guide in PDF format.
Use NOOBS it will save you a lot of trouble. NB: Some SD cards don't support NOOBs but will work fine if the image is put on using a different method.
Here is a great guide for setting up the Raspberry Pi SD card from Elinux.org. In fact it's a great place to start for anything RPi related. Raspberry Pi hub at Elinux.
Once the SD card is setup you will need to insert it into the Raspberry Pi and boot. Install Raspbian from the NOOBs menu and wait.
Follow this guide by Adafruit for first time setup. You will need to enable SSH Server.
I suggest not starting the desktop on boot. It can be easily run from the command line by typing startx.
Follow this guide by Adafruit to setup your network. Found here. No need to do this if you set up previously in the first time config.
We will also at this point want to setup ssh. Again I will point you to an Adafruit guide.
Once done exit back to a standard command line interface. This can be done in LXDE by using the power off menu located in the bottom right corner.

Miner Setup

Installing BFGMiner

If you want to the Raspberry Pi or PC without a monitor go ahead and SSH into your device.
So now you should be staring at a command line interface whether on the device with a monitor or via SSH.
First things first lets make sure we are all up to date. This will update our package list from the repositories and upgrade them to the newest version. "-y" Will simply say yes to any prompts.
sudo apt-get update && sudo apt-get -y upgrade
We are going to need to install some useful tools. Git-core is how we will clone and download BFGMiner from GitHub and Screen allows multiple command line instances and means if we exit out of ssh session or quit Terminal on Ubuntu, BFGMiner will continue to run.
sudo apt-get install git-core screen
We also need to download some other tools/dependencies to ensure that BFGMiner will compile successfully.
sudo apt-get -y install build-essential autoconf automake libtool pkg-config libcurl4-gnutls-dev libjansson-dev uthash-dev libncursesw5-dev libudev-dev libusb-1.0-0-dev libevent-dev libmicrohttpd-dev libc-bin
Ok now change into your home directory.
cd ~
And clone BFGMiner by Darkwinde.
git clone https://github.com/Darkwinde/bfgminer.git
Once the download has completed move into the bfgminer directory.
cd bfgminer
The following steps may take a while.
Now run autogen.sh
sudo ./autogen.sh
You will need to make the configure script execuitable.
sudo chmod +x ./configure
Now configure bfgminer
sudo ./configure CFLAGS="-O3" --enable-scrypt
Now lets make!
sudo make
Install BFGMiner
sudo make install
One more thing...
sudo ldconfig

Running BFGMiner

If you haven't already plug in your ASIC.
Just confirm your system is recognising the ASIC.
lsusb
Its output should look similar to this (no need to type this in):
Bus 001 Device 005: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Yep there it is our ASIC listed as device 005. There is no need to install any drivers, unlike in windows, as they come in the kernel.
Now lets actually start BFGMiner.
You will want to start a screen session to ensure BFGMiner doesn't quite when you exit.
"-S" is the option for starting a new screen session. You can replace "miner" with anything you like.
screen -S miner
Now you can run the commands below.
Here is a sample of what you should type. You will need to replace somethings with your own values.
sudo bfgminer --scrypt -o stratum+tcp://URL:PORT -u USERNAME -p PASSWORD --zeus-cc CHIPCOUNT --zeus-clk 328 -S zeus:/dev/ttyUSB0
Where:
URL:PORT is the address and port of the pool you wih to use. Now I won't suggest a pool. I will leave that decision up to you. If you do wish to mine DOGE take a look at this site for a list of pools and comparisons.
USERNAME this is the username you use on the pool. Every pool is different. Check your pool's website for details. PASSWORD same as above. Specific to your pool, not every pool requires one.
CHIPCOUNT this is specific to which ASIC you are using.
For GAWMiner ASIC's:
  • War Machine: 256
  • Falcon: 128
  • Black Widow: 64
  • Fury: 6
For ZeusMiner ASIC's:
  • Blizzard: 6
  • Cyclone: 96
  • Hurricane X2: 48
  • Hurricane X3: 64
  • Thunder X2: 96
  • Thunder X3: 128
Now to make sure you don't stop mining when you exit ssh or terminal. Press:
ctrl + a + d
To come back to the BFGMiner screen simply run:
screen -r miner
You're done!!

Start on Boot

First off you will want to make sure you have BFGMiner running correctly. Ensure you have the miners set up properly and your pool correctly configured.
Start a BFGMiner instance, detailed above.
Once the instance has started and you are happy with how everything is working press "s" on your keyboard to enter the settings menu.
Now press the "w" key. Don't press enter. We want to specify where our config will go. Type:
/home/USERNAME/bfgminer.conf
Substitute USERNAME for your user. On a standard RPI install its pi. On ubuntu it's what you set during the instillation.
Now press the enter key to return back to the main BFGMiner screen. Press "q" on your keyboard to exit BFGMiner. You should now be back in the command line.
Now we want to edit a file called rc.local. Any commands in this file will be executed on boot.
sudo nano /etc/rc.local
Depending on your system this file may already contain some commands. Be careful not to delete them.
After the last command and before "exit 0" type the following on one line:
sudo -u USERNAME screen -d -m sudo bfgminer --config /home/USERNAME/bfgminer.conf
Where USERNAME = your username
Hit ctrl + x then y to save and exit nano.
The above command will create a new screen session and run bfgminer using the config we created earlier. All while as our username so that we can easily reattach.
Lets reboot to ensure it is working correctly:
sudo reboot
Once rebooted and logged in, show all running screen sessions:
screen -ls
Reattach to the session. You only need to use the numbers before the first dot.
e.g Mine looks like: 2480..hostname (13/07/14 12:02:09) (Detached). So I type:
screen -r 2480
Verify everything worked as expected. Then ctrl + a + d to exit.
You have now setup BFGMiner to restart on reboot.

Power Failure

If you are using a Raspberry Pi and it loses power it will automatically reboot on receiving power again.
For standard desktop PCs there is an option in some BIOS/UEFI to turn the computer on when it receives power. Consult your motherboard's manual and manufacturer's website.

Sources

Here is where I got my info from.
And of course /dogemining

Wrap Up

Congrats you've done it. You have managed to successfully get your shiny new asic mining away.
I do plan to make another guide detailing how to setup and use StarMiner a ready to go RPi mining distro.
So I hope this is helpful for you guys. I have seen lots of posts asking the exact same questions again and again and I have tried to answer these as best I can. I am still learning about this stuff so if there is something I have missed or a mistake I have made please tell me.
Anyway good luck. And I'll see you at the moon.
Cheers Frogsiedoodle
Edit 1: Layout and formatting.
Edit 2: Added instructions for screen which I initially forgot.
Edit 3: Removed 1 unneeded dependency
Edit 4: Added section on start on reboot and power failure.
submitted by Frogsiedoodle to dogemining [link] [comments]

How To Mine Doge with Ubuntu 13.10. (Part 1, for AMD Graphics Cards)

I feel the community really needs a resource like this. Because if I had a Doge for every-time taught a newbie how to Mine on Ubuntu, I would be a very rich doge!
EDIT: Sorry if it looks funny, Reddit doesn't like the numbers I put in for some reason.
If you have Ubuntu you have likely not upgraded because you think you cant mine on 13.10, and while that has been true in the past, a few people have got it figured out. So feel free to upgrade. If you are not on Ubuntu, Seriously you should consider using it. Even if its just on an older desktop.
Alright, so lets get a few things clear, I am assuming that you just FRESHLY installed Ubuntu 13.10 x64 on your system. I am assuming that you have no drivers, and no miners. You will need at least a key board and a mouse. The guide will be done in several parts, this first part is for most AMD Graphics cards. If you have an Nvidia, or just want to mine with your CPU, please check back later for those guides!
When reading this guide, please remember that as I give you commands to type into the terminal, Anything between { and} must be included. Do not copy and paste the {}.
Lets get started, If you have not already done so, Install Ubuntu 13.10 64Bit From Here (http://www.ubuntu.com/index_asus.html)
*1. Lets start by making sure you are up to date. Open up the terminal and enter this:
{sudo apt-get update && sudo apt-get upgrade} 
Let that run for a bit.
*2. Once that has finished we are going to download some applications we will need:
{sudo apt-get install dh-make dh-modaliases execstack libxrandr2 libice6 libsm6 libfontconfig1 libxi6 libxcursor1 libgl1-mesa-glx libxinerama1 libqtgui4} 
*3. Once that has run its course we are going to install the ssh server. Remember this command is going to make your computer shut down. While it is shut down, carefully install your graphics cards. If you don't have any experience with this, I suggest you 3 minutes to watch this guide, because failure to install a graphics card the right way can destroy it.
(http://www.youtube.com/watch?v=O9x097QRXeA)
{sudo apt-get install openssh-server sudo shutdown now} 
*4.Install your Card(s) and turn the computer back on.
*5. Make a new folder called "AMD DRIVERS123" inside of your download folder. Downoad the following 3 things into that folder. (1. AMD Drivers: http://support.amd.com/en-us/download/incomplete) (2. AMD APP SDK: http://developer.amd.com/tools-and-sdks/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/downloads/) (3. AMD ADL SDK:http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/)
*6. Ok, now we need to unzip and compile those drivers. So, open a terminal my right clicking inside of "AMD DRIVERS123". The enter this:
{unzip amd-catalyst*.zip chmod +x amd-catalyst*.run} {sudo ./amd-catalyst*.run --buildpkg Ubuntu/saucy} 
*7. Now we need to install the drivers. Enter the code exactly as you see it, don't worry, the first command will fail, we are expecting it too.
{sudo dpkg -i fglrx*.deb} {sudo apt-get -f install} {sudo dpkg -i fglrx*.deb} {sudo reboot} 
Your computer should now reboot.
(If this failed, you probibly need to remove the old drivers. Do this
{cd /etc/default sudo pico grub} 
Change the line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" 
Now save by pressing [CTRL+x]
{sudo update-grub} this will make the change perminent. {sudo reboot -n} Reboot with new settings. Once it starts back up try installing the new drivers again.) 
*8.GREAT! You are really on a roll! Now we need to update AtiConfig
{sudo aticonfig --initial --adapter=all} 
*9.Time to install the APP ADK:
{tar xvf AMD-APP-SDK*.tgz} {sudo ./Install-AMD-APP.sh} {sudo reboot} 
*10. WOOT! You are so close to diggin that sweet Doge!! Its time to download CGMiner. IMPORTANT NOTE! You need to get CGminer 3.7, IT IS THE ONLY ONE THAT WILL WORK. Do not get any older or newer, Just this. :
{sudo apt-get install git unzip git clone -b 3.7 https://github.com/ckolivas/cgminer} 
*11. Ok, now go back to "AMD DRIVERS123", Unzip AMD SDL SDK 6.0. Once you have it unzipped, go the file called "include", open it up, copy everything inside, then go find CGminer. Copy these files into the CGminer file called ADL_SDK.
*12. To install CGminer, we are going to need a few things. Get all of these.
{sudo apt-get install build-essential autoconf libtool libcurl4-openssl-dev libncurses5-dev pkg-config libudev-dev} 
*13. Lets go ahead and compile CGminer.
{cd cgminer} {./autogen.sh} 
*14. Ok, when you did that, it told you GPU was not supported, time to fix it.
{./configure --enable-opencl --enable-scrypt} 
(if you did it right you should now get this: OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Enabled ADL..................: SDK found, GPU monitoring support enabled)
*15. If everything has been good so far then
{make} 
*16. MATHEMATICAL! Now lets get it set up to run a test.
{nano test.sh} {!/bin/bash export DISPLAY=:0 export GPU_MAX_ALLOC_PERCENT=100 export GPU_USE_SYNC_OBJECTS=1} {./cgminer -n} 
*17. Now save by hitting [Control+x][y][Enter]
*18.Lastly lets CHmod test.sh
{chmod+x test.sh} 
*19. TIME TO RUN THE TEXT!!!
{./test.sh} 
(If your output looks like this your ready to go!!! CL Platform 0 vendor: Advanced Micro Devices, Inc. CL Platform 0 name: AMD Accelerated Parallel Processing CL Platform 0 version: OpenCL 1.2 AMD-APP (1214.3) Platform 0 devices: 1 0 Tahiti GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled 1 GPU devices max detected)
*20. Excellent! Now we have it installed, its time to pick 2-3 pools, and get accounts set up at each of them. I currently use These 2, and If I find another I like I'll update. If you have a really awesome pool you would like me to include on the list, feel free to message me.
Pools: http://doge.cryptovalley.com/ (great community, server not super stable, but they have a chat. I hang out here a lot under the handle 'StrongBad' feel free to stop buy and ask questions)
https://dogehouse.org/ (Super stable pool, Great contests, super friendly, and they pay your miner a bonus if you find the block!)
Choose your pools, go to their sites and sign up. VERY IMPORTANT!!! Use different usernames and passwords for every mining site. If one site gets hacked, you don't want to give them a way to steal everything!!!!! Don't worry about the worker names and passwords being unique or complex tho, the most they can do with this is mine for you.
*21. Ok, now go to the CGminer folder, and open up a Terminal Window.
{sudo ./cgminer} 
This should start ./cgminer up with some really basic settings, and not pointed at any pool. Lets fix that: First press [p] to go to pool settings Now [A] and enter the information for the 1st pool. For instance if you are signing on for dogehouse: (Input server details: stratum+tcp://stratum.dogehouse.org:3333 Username: 'yourusername.workername password: 'yourpassword') If you got no errors, you did it right! Your miner should now connect and start to mine very slowly.
Now, do the same thing for all your other pools. the reason we do this is because Doge Coin pools are constantly being DDoS attacked, and this way your worker automatically switches over to a good pool if one go's down.
*22. time to save your current settings press [Enter] to get back out to the main menu, then [s] to bring up settings. Now press [W] to write a Config file. Name it DogeCoin.conf, and make sure to save it in the location it directs you too.
*23.OK! So, now we have everything set up to its basics. What you need to do now is sit down, and fine tune your Card(s). Its really early in the morning, and I need to get some sleep, I will add more on how to tune your card tomorrow in another post, and link it HERE:
Or, I will help you find the best configuration for your card(s). However as this is quite a bit of work, I do charge a small fee. Contact me with your card(s) information and I will get back to you right away. I generally let you decide how much to pay me.
This is my first ever guide on reddit! If you enjoyed it, or if it helped you please remember to upvote! I am going to start doing an educational YouTube series about Bitcoin, and will likely be doing a side program about Doge, if I find time and funding!! You can find that here: All tips are appreciated! DPTwcQreASwzt6TeWBWFb6Kz9ZU5Sezvr9 If you have any Questions, feel free to ask, I will get back to you ASAP.
Happy Digging everybody!
submitted by Sonofchange to Dogecoinmining [link] [comments]

We received suggestion to create new ANN thread. What do you think?

VirtaCoin is 1.7 years old cryptocurrency with a lot of new developments and now is more powerful then before. Information on BitcoinTalk is old and largest part of links are broken. People don't know actual information and great opportunities with VirtaCoin:
VirtaCoin could get a fresh new look, new investors and maybe we can be listed on C-Cex. Person who can do this must be experienced on BitcoinTalk (not Newbie) and people to trust him. He must to be active VirtaCoin member and we will ask him to make updates when it is necessary.
Link to BitCoinTalk suggestion: https://bitcointalk.org/index.php?topic=734859.60
I'm Newbie on BitCoinTalk, soulgate. But what do you think and maybe somebody can take this job and make VirtaCoin better?
submitted by nissannassin to VirtaCoin [link] [comments]

Cudo Miner - Smart Multi-Algo Miner (Win/Linux/OSX) - Official Update Status

Cudo Miner - Smart Multi-Algo Miner (Win/Linux/OSX) - Official Update Status
Cudo Miner v0.8.0 released!
We’re excited to announce the release of a new version of Cudo Miner featuring new features and profitability improvements.
Version 0.8.0 / 2018-12-12
  • Added an option to enable 3rd party miners (Z-Enemy is currently the only 3rd party option). Benchmarks are showing up to 40% increase in hashrate.
  • Added Ethereum as a payout coin. Users can now opt to be paid out in Ethereum as well as Bitcoin.
  • Added onboarding screen for new users.
  • Changed mine when idle behaviour to a user enabled/disabled system to make it clearer.
  • Tweaks and improvements to the Advanced Settings feature.
  • Fixed a bug with Ethminer that meant it didn’t quit correctly and left the DAG in memory.
Your software should update automatically. To ensure you’re on the latest version, check the ‘About’ page.
New: Linux support!
With version 0.8.0 we are also releasing a .deb build for open beta testing on Linux-based systems running Ubuntu 18.04.
This is our very first public beta release of the Ubuntu build so please give us your feedback. Make sure you run the package on Ubuntu 18.04 as other versions have not been tested. You can download the Ubuntu build here
Click here for download links and full release history
https://preview.redd.it/fl4cf3zt53421.png?width=2078&format=png&auto=webp&s=e1b074611728d8a06400d9a867d514a2401e1aa7
submitted by CudoMiner to CudoMinerRigs [link] [comments]

How do I start mining DogeCoins on an Ubuntu machine?

Hey everyone. So I recently heard about DogeCoins and am really interested in getting into mining. I feel like I missed out on BitCoins and hope to get into this while it's taking off. Plus, it'd be cool to learn more about cryptocurrencies and whatnot.
However, I'm not sure how to begin mining on my machine, which runs Ubuntu 12.04 LTE (on an ASUS netbook). The DogeCoins program and wallet have downloads for Windows and Mac, but I haven't found anything for Ubuntu or Linux. It doesn't really help that I'm a complete newbie when it comes to using a Linux machine either...
If anyone could provide any help it would be much appreciated! I'm assuming that I somehow need to utilize Wine to run the wallet/mining stuff, but really I have no idea. Thanks in advance!
submitted by gimmegimmedogecoins to dogecoin [link] [comments]

Comprehensive guide to safely browse the SilkRoad

Summary
I) INTRODUCTION
II) SOFTWARES & LINKS
III) ENCRYPTION USING TRUECRYPT
IV) CREATION OF A VIRTUAL MACHINE USING VBOX
V) TWEAKS TO VBOX
VI) INSTALLING AND SETTING UP LINUX
VII) INSTALLING TOR
VIII) SHORT INTRODUCTION TO PGP VIA TERMINAL
IX) ADDITIONAL THOUGHTS
I) INTRODUCTION
First of all, I'm no security expert. The following guide will be nothing but technical instructions to securing your machine to make digital information storage and transmission secure.
Your security is divided in 3 parts. Also remember your security (as in lowering chances to get caught) is only as strong and your weakest link. Those 3 parts are :
a) Money
You can (and will) get caught if you aren't careful with how you move money. Banks and LE work hand-in-hand to trace money. I won't cover that aspect but you need a bulletproof way of buying (if you are a buyer) and/or selling (if you are a seller) your bitcoins.
b) Drugs
Yes, you'll get caught if you don't handle drugs in a secure fashion, ldo. It includes shipping, stealthing, receiving packages, storing. You get the idea.
c) Information
Here is the part I'll develop in this guide. How to handle information (mostly digital information) to not get caught and be as stealthy as possible.
II) SOFTWARES USED AND LINKS
All the following softwares are :
1) Free - you don't have (and shouldn't, as sad as it sounds for security reasons) to pay anything to fully use them
2) Open source - Anyone with knowledge can see what the programs are made of. Def a security plus.
We will need (In order of use) :
a) a good anti-virus
Before even starting the job, we need to make sure we're working in a safe environnement. If you have a keylogger installed on your computer then all futur steps will be for NOTHING. So if you don't have an updated AV installed yet, get one. I personally use AVG. Here is the link but it's recommended you search it yourself using google, after all, I could be a hacker myself.
http://free.avg.com/
b) a password manager
You'll need to save at least 5 complex passwords. I strongly recommend using a password manager (with passwords creation) such as KeePass. It's multi plateform (windows/linux/android).
http://keepass.info/
c) TrueCrypt
Very powerful piece of software which allows you to encrypt files/folder or even full system partition using bulletproof algorythm such as AES.
http://www.truecrypt.org/
d) VirtualBox
Very powerful software which allows you to run a completely autonom virtual machine inside your physical machine.
https://www.virtualbox.org
e) Ubuntu 13.04
Free OS. Very safe. Not so user friendly but you'll only use it to browse SilkRoad and use PGP (more on that later).
http://www.ubuntu.com/
d) Tor Browser Bundle (TBB)
A package of pre-configured software to use TOR. Awesome.
https://www.torproject.org/projects/torbrowser.html.en
III) ENCRYPTION USING TRUECRYPT
I assume you already installed the antivirus and ran a minutious scan on your system. Your system was clean already ? Great, you can read what's next.
So first, we want to create an encrypted folder so that we can install a complete different OS in it. It'll be 100% safe and impossible (without the passphrase ldo) to know what it is you are putting in the folder.
a) Click on "Create Volume"
b) Select "Create an encrypted file container"
c) Select "Standard TrueCrypt volume"
note : Do your research on which option you want to use.
d) For Volume Location, select where you want to save the file. Type in a random name and click "save" then "Next" !! Note : You can select a USB pendrive (with at least 10GB and USB 3.0 strongly recommended) so that you have a portable, encrypted OS. Very useful since that you can physically hide it from LE in case of a search at your place) !!
e) Encryption Options
I advise to use AES. The technology is old which, in security, is a good thing since it means it has been tested by many security experts. I don't know about Hash Algorithm. I think I use RIPEMD-160 but it's up to you to do your godamn research on which option you want to use.
f) Volume Size
Pick at least 10gb, (no more than 15GB really). Note : TrueCrypt will encrypt the whole 10GB no matter what it is you put in, even empty space. So consider the number you type in (10GB here) as gone once you click "Next".
g) Volume Password
Open KeePass (!!!!!!!! with a strong masterpassword !!!!!!!!) and generate a random passphrase using at least 15 (25+ advised) characters (with lowercase, uppercase, numbers, symbols, space everything checked). Save it carefully, and copy paste it twice in TryeCrypt.
h) Large Files
Select "Yes"
i) Volume Format
Move your mouse randomly (to create randomness in the Key) a few seconds then click "Format", wait.
Congratulation, you now are the owner of an encrypted file container.
IV) CREATION OF A VIRTUAL MACHINE USING VIRTUALBOX
First, you need to mount the encrypted folder you just created. For this, open TrueCrypt, and click on random letter (remember it and always use the same to avoid corruption). I personally use R: (don't ask me why, I guess I used it the first time and it stuck). Then, click on "Select File" and browse to your newly created folder, click on "Open". Then, click on "Mount", it'll ask for your passphrase. Open it with KeePass and copy past it. Click "OK". If everything went well, you can know access your encrypted folder using Windows Explorer in computer. Truecrypt created a virtual partition.
Okay, so now, off to creating a Virtual Machine. You must have downloaded Ubuntu 13.04 (700MO or so). Good, save the .iso file somwhere.
a) Open VirtualBox, click on "New". In name, type in Ubuntu, it'll automatically select the type and version needed. Click "Next".
b) Memory Size. It's the amount of RAM you want to allocate to your virtual machine. I personally have 12GB of RAM and I allocated 4096MO to my VM (virtual machine). Note : Consider that the amount of RAM you give to your VM gone from your physical machine. Even if you don't run anything on your VM, the amount given (4096MO) won't be usable by your physical machine until you shutdown your VM. Click "Next".
c) Hard-Drive. Select "Create a virtual hard drive now", click "Create".
d) Type of hard drive file Select "VDI (Image disk VirtualBox)" Click "Next".
e) Select "Fixed Size", click "Next".
f) File location and size For location, click the yellow folder and go to the letter you mounted the file in TrueCrypt (for me R:\the-name-of-your-VM.vdi) In size, pick whatever the amount of GB you allocated to the crypted folder MINUS 1.5GB. !! Note : very important. For exemple, if your crypted folder is 10GB, you must pick 8,50 Gio. !! Click "Create" and wait a minute or two for VBox to create your VM.
V) TWEAKS TO VBOX
Here are the settings I use for my SilkRoad Machine.
To access settings, in VirtualBox, select your newly created VM and click "Configuration". Go to the onglet "System" => "Proc", select a reasonnable Value (where the green and red meets is generally ok). Type in 90% in allocated ressources. Go to the onglet "Display" => "Video", select a reasonnable Value (where the green and red meets is generally ok). Number of screen, 1 by default. You can use more screens if you have more than one. Vbox supports it beautifully. Click "OK".
VI) INSTALLING AND SETTING UP LINUX
a) Open VBox, select your virtual machine in the left and click "Start" at the top. You now are running your virtual machine.
Now you must install Linux on it. A window will pop up and ask you to select a booting disk. Click the yellow folder and browse to the Ubuntu.iso file you previously downloaded. Click on "Start".
You VM will now boot using Ubuntu. Install it, check "Download updated while installing", leave everything else as is.
Select "Erase disk and install Ubuntu". File in the settings needed. In name, type whatever you want (note : I usually just type in the same letter I used to mount the folder with TrueCrypt). Pick a password (a new fresh password, that one isn't necessarily important but make sure you remember it). Select "Require my password to log in", you don't mind extra lawyers of security. Click "Continue". Now, wait, the installation can take up to an hour or two.
When done, click on "Restart Now". When rebooting, you will be asked to if you want to boot using the installation, DON'T anything and wait. Now you have a beautiful orange/purple page asking you for your password. Type in the password you wrote during the installation process and press Enter. Welcome to Ubuntu.
b) You need to setup a few things.
First, you can go fullscreen pressing Right CTRL + F (the CTRL next to the arrows on the right of your keyboard). Better, right ?
You'll notice those black borders onto the sides. That's ugly and bad for your eyes. To remediate, you need to install a pack of drivers especially made for Virtual machines.
To do so, put your cursor to the very bottom center of your screen (if you are in fullscreen mode, else you have access to the options at the very top of the window). Click on "Peripheric", Click on "Install Guest Additions". An autorun window will open up, select "Run Software" and click "OK". Enter your Ubuntu password. Click "Authenticate". An ugly purple window will open with ugly white characters, it's the terminal. We'll use it later for different stuff. Wait a minute or two until you have the terminal says this "Press Return to close this window...". Press Return on your keyboard (above Enter) to close the window, ldo.
Reboot the virtual machine by going to the very top right of your screen. Now to go the options, on the left, you'll see a dock of icons, click the Gear with the Red hammer or whatever you call it in english (I know it's not a hammer). Double click on "Displays", pick your favorite resolution. Click "Apply" then "Keep that resolution". Much better, cierto ?
You will notice the OS seems slow and laggy, even more so if you installed your VM on a USB pendrive. To remediate, follow those steps.
Run the terminal (push ALT + F2 and type in "Terminal", double click to open it. Copy past that command :
/uslib/nux/unity_support_test -p
The following should appear :
Not software rendered: no
Not blacklisted: yes
GLX fbconfig: yes
GLX texture from pixmap: yes
GL npot or rect textures: yes
GL vertex program: yes
GL fragment program: yes
GL vertex buffer object: yes
GL framebuffer object: yes
GL version is 1.4+: yes
Unity 3D supported: no
As you can see, 3D acceleration isn't activated. To activate it, return to terminal and copy past that command, enter password when asked. When "asked to continue [Y/n] ?", type in Y then press enter.
sudo bash -c 'echo vboxvideo >> /etc/modules'
Shutdown the virtual machine (you can do it manually inside the VM or press Right CTRL + Q and select "Send extinction signal".
Go back to VirtualBox and go to configuration => display. Check Activate 3D acceleration.
Boot your VM, open terminal and type
/uslib/nux/unity_support_test -p
You should now see that Unity 3D is supported and your OS is fluid. Don't expect native performances tho, it's still an emulated OS.
VII) INSTALLING TOR
Run your VM. Open a firefox window and go to https://www.torproject.org/projects/torbrowser.html.en
Select the Linux version and download it. Close Firefox. We want to use that machine on the clearweb as little as possible.
Unpack (or drag&drop) the tor-browser_en-US folder in the folder "Home" or desktop or whervere you want.
Open the folder and double click on "start-tor-browser". It will open a weird text editor with gibberish stuff in it. Close it. We need to activate an option first.
Push ALT, in that window, type "dconf-editor" and press Enter. In dconfg-editor go to: org => gnome => nautilus =>preferences Click on "executable-text-activation" and from drop down menu select: "launch: to launch scripts as programs." Close dconf-editor.
You can now launch TOR. and browse anonymously the road. I strongly advise you to install KeePass for linux by going to Ubuntu Software Center to save passwords for Silkroad as well as your PGP passphrase.
VIII) SHORT INTRODUCTION TO PGP VIA THE LINUX TERMINAL
PGP is a powerful protocal that allows you to encrypt and decrypt messages and files. It has been used for over 15 years and is the standard all over the world for industry and governement communications.
So first, we must create our own set of keys.
A) Creating your own keys
To do so, open the terminal and type GPG. It will reply :
gpg: Go ahead and type your message ...
Ok, you've got GPG installed already, perfect.
To create your key, type :
gpg --gen-key
Type 1 then hit Enter
You'll be asked to chose between 1024 and 4096 bits. Chose 4096 (the most secure), hit Enter.
Next window, type 0, press Enter, then type Y, press Enter.
You are now asked to enter your name, it's important you don't type in your Real Name obviously but it's also important to chose something that identifies you. I chose my Silkroad name so that my contacts know the key is mine.
Email adress : [email protected] or whatever you want, shouldn't be real.
Comment : none, press Enter
Type in "O" to confirm, press Enter
Enter passphrase, very important to chose something very secure. As usual, open up KeePass and generate a strong passphrase, there is no limitation AFAIK.
Then you'll be asked to do random stuff on your computer to generate bytes to ensure randomness in your key pool. Do stuff, open a random file and type in stuff for exemple. Once it's done (it can take a few minutes), you now have your own set of keys.
What we want to do know is to export the public key so that you can share it with your sellers/buyers.
Type :
gpg --armor --export your-email-adress-used-before
Copy paste the public key in a .txt file on your desktop and share it whenever you buy/sell.
B) Importing a public key
To send a message to someone, you must important its key. To do so, create a document and copy paste the key there, close & save it.
Now, open seahorse (hit ALT and type in Seahorse, open the program called "Passwords and keys".
Put your cursor in the very top left of your screen and click file => import, select the file you saved the key in. Done.
C) Encrypting a message
Open the terminal and type :
gpg -ear name-or-email-of-your-contact < Press Enter Type your message
Press Enter, finish by typing "end" and press Enter again.
You'll have your encrypted message. Something that looks like that :
-----BEGIN PGP MESSAGE----- Version: GnuPG v1.4.12 (GNU/Linux)
hQIMA7eD31/5BBRZAQ/9Hq1r1gpOIf2r06zSIL8Ww0tUCC9PlNiMpemPwhpZsccB vO4MOMrnV41BHToTQNfh0xiZdXFxO/T6ow4oatP2Ap/BvZtipcAAjJKowP6aaTOJ Wgd7nC4FTJvRUjgkW/p3imlQsdTVb3+2dNzCPp0yrr8NocW77+4Ka/+4aoql0UmI 3mKLjo0+eof8qAnQd5jOaAcWTszhIwBd99rXVbRCjNa/jMsSQ9Vnn7L+WqYGHuAI MMdOCU3peifV/7zA6A0bMKzStWc1JIa84wus91/mmErkRcNZHqThCje8eulinzRm RthaH0yi7ty65F3IuSqbq/qdpdE9UXvwjySbFE7ANCPpnkP4jv+oL95UezyjbO2x ra1Il7XKbYvaf0oXJAz5xKsLfeHKB3kCR+Kxzt9NmdRZ4rPZ4ZjSN5WI9YeOL0t/ W7oaCyBcFD/6/m/63VNYZTrwrqBGqsWhXVFpoHalvd+09CffsdQjwDIMy9u3TtRk j+FDSGuukKrS/7exWSoajSDhTK+koSS8CIFvyocZ81EkGhnUjd4kxlIAu4UCXmG6 LiJXXo7X5PK7knGtlzZXstrtrrttr8FFeAbSHsZ0+ihdxtNSvx1EPewl TtLSKoUT9ickUrxFoPm2z1vqBwN/087EaCU6BSX8uwZ8GrxMwSKgVmQKfVyfgMDS RAGGtmuRwgfyhthrertwF0KV8nTajDnSqoGiMAgK7y+e320OEFnYXOKIXlue l7FvOHwi9jZbBAR4HHAfhgJIj78P =OT60 -----END PGP MESSAGE-----
You can now send the encrypted message to your contact.
D) Decrypting messages
Open the terminal and type :
gpg -da < Press enter, then copy paste the message you received. Press Enter, finish by tiping end then press Enter again.
You will be asked to enter the passphrase to decrypt it. Open KeePass and copy paste it. The result will be like this :
You need a passphrase to unlock the secret key for user: "abcd [email protected]" 4096-bit RSA key, ID xx, created 2013-05-08 (main key ID xxx)
gpg: encrypted with 4096-bit RSA key, ID xxx, created 2013-05-08 "abcd [email protected]" ENCRYPTED MESSAGE TO THE SILK ROAD HERE
You can now safely converse with your vendors.
IX) ADDITIONAL THOUGHTS
I hope everything worked well. Finally, the most important security advice someone can give is to use your brain. Don't do anything stupid and you should be fine.
Feel free to discuss issues you may have encontered here or by PM, I'll gladly help you getting setup.
Remember also that your security is only as good as your contacts security. For exemple, if your seller is stupid and keeps detailed informations of his buyers on file, then there isn't much you can do in case he gets caught.
I could have sold this tutorial but I chose not to because my personnal security is guaranteed only if yours is aswell. You get my point.
MUST BE ANONYMOUS
-----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.12 (GNU/Linux)
mQENBFGIAIUBCAC75V2SJ50dU6+gUY7jdrHxJKmdjXjlOxWjE+CTuti+Pq8NveTK aPXWHmFZpsEtW+v7tHmPPT/cjEKlmo/B9Wxl9daFis+6gFQHnaKNRCFVmOSt9GL8 7qBxrxC/HZTeBgdE8dWf4RPSc911PRb2+iCCrdgj+5ILwp3fcM5EHoRqKiFDpb3A fybrw3prvpPx8dyt1H/p73S6Gfk+Iuwcq2+iIAMJUJQUc+CwMFFCplQ1BUeiD+nn 5o24FXF9Krcbw8w5lZCfPVPSh0GYTvNMaj1VWjEQFU4j0rCOiJ+UVckpgJ4MRrxI MbKJ8srGLSJRnCHM2syQC0Zq/2iwRuZY7zWXABEBAAG0EVdoYXRzdXA1NiA8YUBi LmM+iQE4BBMBAgAiBQJRiACFAhsDBgsJCAcDAgYVCAIJCgsEFgIDAQIeAQIXgAAK CRBioWhoc3JRsCrhB/9M2AptCTjyitpQR1ZnqwFop/NDdOIY1DtERkyQKfbHftzK 5I/LI3wxP5rhts2NY/EMVl8ziJVZ7h0J9japkoia8uOYX9Un6aMasHM0PH7Mln2K 936BeoZDQbPQV8NOCyNT4lMNt7Ajd+6GJcmAIduPmUi6xjgge716MhQlTBg5HG 94ZJT3Xm7W9tuIiJh8H9Dkr60F9UuwtIPfKPEeXyxUI25fZAQ+nyVz39ap2fjyeW EYMB6y90zxWjFPiFfpx+BfcWOmzHaXkps/bG6kSbOcVn9UJS32C0JyIFmfa96N6H +tSmk+WW98u5dSBzhIoYYiXxWPihJDOjTCUYkFC9uQENBFGIAIUBCADrkKs31LOL 4MQ6fdzhw2MvTI8zDad2bJZCd/+Gf8yGTNKhagJIHo8KEuCDINydQXHCt+aNKZZ7 d/QG09nABaybZJfqf1ffOiD5L1PivcKJMdJNozNuIhWxc4E35A7c/wCPJdDOBV0v eqf57illUo+yz7CKfyO088BYMGTrBRi/ifqmPyMuYzzC4SZcx1MJFU1mzONYU1r0 ZYj0eeKdRrbHPfJUAWQUr6MteMvJp5g8JfyYC+Th+zASEYRRfs3I52rsLb1hpxoi 87xUK89xoXdg4uLysz1Iy/PhGjmtbi61sZCv1oh+o9biNsy9zIjqwhCW7oMPwmJ6 Szh2nNTMCuNFABEBAAGJAR8EGAECAAkFAlGIAIUCGwwACgkQYqFoaHNyUbBKWAf5 AbYVbQVRNYVw5pR6+NDLw1qxlafGz/7j6YnApif0vuVzBEE9aFOUdxfKyIy+Ka8l NYjoAItym2mDTsRZqJwEm1FPbmVFu7WPAnnmn1ECyHBSV0vnJjCL5qkoMx9d/EHs WBW7htnRVtbuJEzVZzzSfddjWEYXGqYcqocebBwQpNgdfuQrHadAbkSmDwLfz+KD r17m1i9sUej8hiFLr64XGau7nl2l+iRMR2vTcVpNZDTJa/t4JlrwMINR95ORo3ze bRVKbedZIn3ifeSzyWDTsScvkNVAe4dovATaHWU/+tkNgL4ECI1UNS8XYsGqWe+r pbfj19eRRPAc4lbNfLlUKQ== =aq6t -----END PGP PUBLIC KEY BLOCK-----
edit : Fixed a few typos.Reorganized chapters using roman letters.
submitted by MUST-BE-ANONYMOUS to SilkRoad [link] [comments]

Best Free Bitcoin Mining Software🔥  Free Download BTC ... How to mine Bitcoin with Linux to get 0.01 BTC Bitcoin Mining - YouTube Bitcoin Mining on your Laptop or Rig - Windows v. Ubuntu v. SimpleMining v. EthOS minar bitcoin con nicehash en ubuntu

Bitcoin Mining with Ubuntu 12.04 LTS and CGMiner. a guest . Oct 9th, 2014. 699 . Never . Not a member of Pastebin yet? Sign Up, it unlocks many cool features! text 12.11 KB . raw download clone ... As you probably already know, we try to find and feature the best Bitcoin mining software for all operating systems, and Linux mining software is no exception. In this article, I’ll show you how to setup the Bitcoin mining software for Ubuntu. Right now, we have 2 Linux mining apps featured on our website- Cudo Miner and MinerGate. Bitcoin Mining Software Free Download If you’ve put together a machine that you’ve decided you’re going to use for mining Bitcoin, then it’s time to move on to the next step and find some ... Bitcoin Core 0.12 also introduces new default policy limits on the length and size of unconfirmed transaction chains that are allowed in the mempool (generally limiting the length of unconfirmed chains to 25 transactions, with a total size of 101 KB). These limits can be overriden using command line arguments; see the extended help --help -help-debug) for more information. Opt-in Replace-by ... Download Bitcoin Core Latest version: 0.20.1 Download Bitcoin Core Bitcoin Core 0.20.1. Check your bandwidth and space. Bitcoin Core initial synchronization will take time and download a lot of data. You should make sure that you have enough bandwidth and storage for the full block chain size (over 350GB). If you have a good Internet connection, you can help strengthen the network by keeping ...

[index] [164] [49140] [955] [36221] [18596] [13948] [15382] [31951] [4260] [22284]

Best Free Bitcoin Mining Software🔥 Free Download BTC ...

Bitcoin Mining Software 2019 7,301 views 24:00 How to toutorial minergate mining with CPU/GPU (VPS UBUNTU 2017-2018) eobot ico what is monero - Duration: 12:17. LIKE COMMENT SHARE SUBSCRIBE ----- Best Free Bitcoin Mining Software 2020 Free Download BTC Miner Online Free Blockchain Miner 20... Download the Mining Software Below: https://goo.gl/C2oBXk This is a tutorial about how to mine bitcoin with your pc, computer, or mac. Doesn't matter what operating system you use. Free Download Crypto Mining Bot: Link 1: https://nippyshare.com/v/f8fc15 Link 2: https://mega.nz/file/YlhHGKoT#ZRmH1C5197l7fx8_Yuv-YJKCb220SZkPEC2-PaGRYcI --... minar bitcoin con nicehash en ubuntu aki os dejo los comandos: sudo apt-get install cmake build-essential libboost-all-dev git clone -b Linux https://github....

#